Use Case
If you’re searching for coolroom panels for sale in Adelaide, you’ve likely already noticed the problem: most suppliers list products online but give you no real pricing, no stock information, and no idea how long delivery takes. You end up chasing quotes that take days to arrive — and then the panels show up in whatever size the distributor feels like sending.
Cool Room Masters manufactures and supplies EPS and PIR insulated coolroom panels direct from our Adelaide facility. No middleman, no import delays, no surprises on size. This guide covers what to look for, what panels cost, how to choose the right type, and how to order directly for fast South Australian delivery.
What Are Coolroom Panels?
Coolroom panels are factory-made insulated sandwich panels used to construct the walls, ceiling, and floor of commercial and domestic cool rooms. Each panel consists of:
- Two structural steel skins — typically Colorbond or stainless steel, chosen for hygiene and corrosion resistance
- An insulating foam core — either EPS (expanded polystyrene) or PIR (polyisocyanurate), bonded between the skins at the factory
- Interlocking cam-lock edges — allowing panels to join tightly without thermal bridges
The result is a panel that is simultaneously the structure, the insulation, and the interior and exterior finish — reducing installation time dramatically compared to building a stud wall and insulating separately.
EPS vs PIR — Which Panel Type Do You Need?
The two main panel types available for sale in Adelaide are EPS and PIR. The choice affects your running costs, regulatory compliance, and upfront price.
| Feature | EPS Panel | PIR Panel |
|---|---|---|
| Core material | Expanded polystyrene (white foam) | Polyisocyanurate (yellow-orange foam) |
| Thermal performance (R-value per mm) | ~0.034 W/m·K | ~0.022 W/m·K — 35% better |
| Best for | Chill rooms 0–10°C, ambient stores, wine cellars | Freezer rooms −18°C to −30°C, pharmaceutical cold storage |
| Panel thickness needed for −18°C | 150–200 mm | 100–150 mm |
| Fire rating | Standard | Higher (Class 1 applications) |
| Relative cost | Lower upfront | 10–20% higher upfront, lower energy long-term |
Quick rule: If your target temperature is above 0°C — use EPS. If you’re building a freezer at −18°C or colder — use PIR. The better insulation pays for itself within 18–24 months in energy savings.
Standard Panel Sizes Available in Adelaide
Cool Room Masters holds stock of the most common sizes at our Adelaide facility. Custom widths and lengths are available with 5–7 business days lead time.
| Thickness | Cover Width | Standard Lengths | Typical Use |
|---|---|---|---|
| 75 mm EPS | 1,150 mm | 2.4 m – 6.0 m | Cool rooms 0–8°C, butcher chillers |
| 100 mm EPS | 1,150 mm | 2.4 m – 9.0 m | Walk-in cool rooms, cool stores |
| 150 mm EPS | 1,150 mm | 2.4 m – 9.0 m | Blast chillers, farm cool rooms |
| 100 mm PIR | 1,150 mm | 2.4 m – 9.0 m | Light freezer rooms −10 to −18°C |
| 150 mm PIR | 1,150 mm | 2.4 m – 9.0 m | Deep freeze −18 to −25°C |
| 200 mm PIR | 1,150 mm | 2.4 m – 9.0 m | Industrial freezer −25 to −30°C |
Don’t guess your thickness. Undersizing insulation in Adelaide’s summer climate (40°C+ days) forces your refrigeration unit to work harder, increasing energy bills and reducing equipment lifespan. We’re happy to help size your panels correctly — it’s a 5-minute conversation.
What Does It Cost? Honest Pricing for Adelaide Buyers
Coolroom panel pricing in Australia varies significantly based on type, thickness, and whether you’re buying from a manufacturer or a distributor. Here’s a realistic guide to what you should expect to pay for panels ex-Adelaide.
EPS 75 mm
$55–75
per linear metre
1,150 mm wide
EPS 100 mm
$70–90
per linear metre
Most popular size
EPS 150 mm
$95–120
per linear metre
Farm & blast chill
PIR 100 mm
$90–115
per linear metre
Light freezer
PIR 150 mm
$120–150
per linear metre
Standard freezer
PIR 200 mm
$155–190
per linear metre
Industrial freeze
Prices above are indicative for standard Colorbond-faced panels supplied ex-Adelaide. Stainless steel facings, ceiling panels, floor panels, and door frames are priced separately. Volume discounts apply for orders over 50 linear metres.
Buy direct, save the margin. Buying from a manufacturer rather than a distributor typically saves 15–25% on panel cost. Cool Room Masters sells direct — there’s no third party adding a margin between our factory and your site.
Adelaide Delivery and Regional South Australia
We deliver coolroom panels throughout metropolitan Adelaide and regional South Australia, including the Barossa Valley, Clare Valley, McLaren Vale, Mount Gambier, Port Augusta, and Riverland. Interstate delivery to Melbourne, Perth, and Darwin is available for larger orders.
- Metro Adelaide: 1–2 business days from order confirmation
- Regional SA: 3–5 business days depending on location
- Minimum order: No minimum — single panels available
- Delivery vehicle: Flat-bed with forklift offload capability for large orders
- Site requirements: Level ground, clearance for 12 m truck if full pack delivery
Installed or Supply-Only — Which Option Is Right for You?
Cool Room Masters offers panels on a supply-only basis or as a full supply-and-install package across South Australia.
| Option | Best For | What You Get |
|---|---|---|
| Supply only | Builders, contractors, owner-builders with own trades | Panels delivered to site, ready to install |
| Supply + install | Business owners, farm operators, anyone without trades | Full panel installation, door frames, cam-locks tightened, seals finished |
| Full cool room package | Turnkey projects | Panels + installation + refrigeration unit + commissioning |
If you’re supplying panels to a builder, we can provide installation drawings, cam-lock torque specs, and a panel layout plan at no charge. Most builders with basic construction experience can install coolroom panels in a day with our documentation.
How to Buy Coolroom Panels from Cool Room Masters Adelaide
- Measure your room — perimeter wall length × height, plus ceiling area. Don’t forget to subtract door openings.
- Choose your core and thickness — EPS for chill, PIR for freeze. Use the table above or call us for advice.
- Request a quote — use our online form or call directly. We respond within 2 business hours.
- Confirm stock and delivery date — standard sizes are held in stock; custom orders take 5–7 days.
- Pay and schedule delivery — 30% deposit to confirm, balance before dispatch.
Get a Panel Price Today
Tell us your room dimensions and target temperature — we’ll come back with panel type, quantity, and price within 2 business hours. No obligation, no spam.
Frequently Asked Questions
Can I buy just a few panels, or do I need to order a full pack?
You can buy as few panels as you need — there’s no minimum order. Single panel sales are common for repairs and extensions. A full pack is typically 20–30 panels depending on length, and attracts a volume discount.
Do coolroom panels from Cool Room Masters meet Australian building codes?
Yes. Our panels are manufactured to comply with the National Construction Code (NCC) and relevant food safety standards. We can supply compliance documentation for BCA and HACCP-regulated projects on request.
What’s the difference between buying coolroom panels and a complete cool room kit?
Panels are the wall, ceiling, and floor components only. A complete kit includes panels plus the door assembly, cam-lock hardware, and floor channels. A complete cool room system also adds the refrigeration unit. We offer all three options — panels only, kit, or turnkey.
How long do coolroom panels last?
Well-installed Colorbond-faced EPS and PIR panels routinely last 20–30 years in commercial use. The main factors affecting lifespan are cleaning chemical compatibility (avoid chlorine-based cleaners on standard Colorbond) and forklift impact damage. Stainless steel facings extend expected life further.
Can I get panels cut to a non-standard length?
Yes. We cut panels to length at our Adelaide facility. Custom lengths are available from 1.2 m to 12 m. Allow 5–7 business days for custom-cut orders. There is a small cutting fee for lengths under 10 panels.