EPS Coolroom Panel Cost Calculator

EPS Panel Cost Calculator

Estimate Your Project Budget for Coolroom Panels

4.0 x 3.0 x 2.7m 50mm EPS Front door

Drag to rotate · Scroll to zoom

Room Size

Model

Preset

Length 4.0m

Width 3.0m

Height 2.7m

Calculated with the next available stock panel length.

Front wall height 3.0m Back wall height 3.6m

Single slope uses different front/back wall heights. Side walls require sloping cut panels.

Panel Specification

Thickness 50mm

Include roof panels

Roof panel type

Over 6m roof span

Roof pitch 22°

Open front for interior view

Door

Include door package

Door size

Door side

Two door sizes available: 2340 x 820mm (EPS Panel 50mm Door Package, $599) or 2040 x 820mm ($499).

Accessories

Include floor C channel Include vertical corner channel Include ceiling/wall corner angle

50mm and 75mm accessories are estimated from online parts. 35mm accessories need manual confirmation.

Quick Estimate

13 Approx. wall panels based on coverage width

12 Roof panel pieces and beam joins

50.8m² Billable panel area after door opening

$2,134 Panels + accessories + door, supply only

Counts are rounded up to full panels and assume trimming on-site. Beams, trims, refrigeration, delivery and labour still need final confirmation.

Project Summary

Configuration copied

drop us a line

Your email address will not be published. Required fields are marked *

EPS coolroom panel cost in Australia — how this estimate works

Planning a cool room or insulated studio and need a fast budget? This EPS coolroom panel cost calculator gives you an instant supply estimate from your room size, panel thickness, door package and roof type. Enter your dimensions above to see the approximate number of wall and roof panels, the billable panel area, and an indicative supply-only price in AUD.

It covers EPS (expanded polystyrene) Z-Lock panels in 35mm, 50mm and 75mm — the same panels we stock for cool rooms, freezers, insulated studios and container fit-outs across Australia. The figure shown is supply only; beams, trims, refrigeration, delivery and installation are quoted separately once we confirm your project.

What affects the price of your coolroom

Panel thickness — thicker panels insulate better and cost more. Typical R-values: 35mm ≈ R0.96, 50mm ≈ R1.39, 75mm ≈ R2.08. Chillers often use 50mm; freezers and hot climates lean to 75mm.

Room size — larger footprints and taller walls need more panels; walls beyond the 6m stock panel length need a beam and split panels.

Roof type — flat, gable, hip or single-slope roofs change panel counts and cutting.

Doors — the estimate includes an EPS panel door package (2340×820mm $599 or 2040×820mm $499).

Accessories — floor C-channel, vertical corner channels and ceiling/wall corner angles.

Delivery & installation — depend on your location and site, and are quoted separately.

Frequently asked questions

How much do EPS coolroom panels cost in Australia?

The price depends on your room size, panel thickness (35mm, 50mm or 75mm), the door package and the roof type. Use the calculator above for an instant supply-only estimate in AUD, then request a quote for exact pricing including delivery and installation.

What panel thickness do I need?

35mm (about R0.96) suits light insulation and partitions, 50mm (about R1.39) is the common choice for cool rooms and chillers, and 75mm (about R2.08) is best for freezers or hot climates. The calculator lets you compare all three.

Is delivery and installation included in the estimate?

No. The calculator shows supply-only pricing for panels, the door package and accessories. Beams, trims, refrigeration, delivery and labour are quoted separately once we confirm your project.

What is the difference between a wall panel and a roof panel?

Wall panels have a flat finish with a Z-Lock join, while insulated roof panels have a ribbed profile with about 1000mm cover designed to shed water. You can use either for a roof, and the calculator estimates both options.

Can I order a custom coolroom size?

Yes. Panels are cut to suit your dimensions, and rooms longer than the 6m stock panel length use a beam with split panels or a custom-panel quote. Enter any size in the calculator and we will confirm the details.

How accurate is the calculator?

It is a quick concept estimate: panel counts are rounded up to full panels and assume on-site trimming. For a firm price and lead time, send us your configuration using Copy Summary or request a quote.

Discover Our Premium Cool Room Panel in Adelaide